Case 1 : Connecting To A Tv With An Hdmi Cable - Best Quality (Recommended) - Samsung BD-D8200 Bedienungsanleitung

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality
(Recommended)
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN
terminal of your TV.
2.
Turn on the product and TV.
3.
Press the input selector on your TV remote control until the HDMI signal from the product appears
on your TV screen.
If you have set the remote control to operate your TV (See pages 22~23), press the TV SOURCE
•
button on the remote control and select HDMI as the external source of the TV.
NOTE
✎
▪
An HDMI cable outputs digital video/audio, so you don't need to connect an audio cable.
▪
If the product is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed
(category 2) HDMI cable.
▪
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
▪
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
▪ When you connect the product to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
▪
You must have an HDMI connection to enjoy videos with 3D technology.
▪
A long HDMI cable may cause a screen noise. If this occurs, set Deep Colour to Off in the menu.
▪
If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV OUT or Digital Audio OUT
to your display device or an audio system to hear audio.
Connecting to a TV
HDMI cable
(not included)
English