Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Remote Control To Operate Your Tv; Installing Batteries - Samsung BD-D8200 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BD-D8200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Getting Started
Setting the Remote Control to
Operate Your TV
To determine whether your television is
compatible, follow the instructions below.
1.
Turn your television on.
2.
Point the remote control towards the
television.
3.
Press the TV button to set the TV mode.
4.
Press and hold the TV POWER button, and
then enter the two-figure code in the table
to the right that corresponds to the brand of
your television by pressing the appropriate
number buttons.
If your television is compatible with the remote
control, it will Turn off.
The remote is now programmed to operate
the TV.
NOTE
If several codes are listed for your television brand,
try each one in turn until you find one that works.
If you replace the remote control's batteries, you
must set the brand code again.
You can control certain functions of your TV with
this remote control.
Button
TV POWER
Used to Turn the television on and off.
Number
Used to input number directly.
Used to adjust the volume of the
TV VOL +/–
television.
TV MUTE
Used to toggle the sound on and off.
PROG ( , / . )
Used to select the desired channel.
Used to select an external source
TV SOURCE
connected to the TV.

English
Function
In case of Samsung TV, below buttons are also
compatible with this remote control.
Button
MENU
Used to move to the TV menu.
TOOLS
Used to display Tools menu.
Used to move the cursor or select an
▲▼◄►
item.
ENTER
Used to select menu items.
INFO
Used to display INFO menu.
RETURN
Return to the previous menu.
EXIT
Used to exit the menu.
These buttons are used for several
COLOUR (A,B,C,D)
functions.
NOTE
The functions listed above will not necessarily work
on all televisions. If you encounter problems, use the
TV remote control.

Installing batteries

NOTE
If the remote does not operate properly:
Check the polarity +/– of the batteries.
Check if the batteries are drained.
Check if the remote sensor is blocked by
obstacles.
Check if there is any fluorescent lighting nearby.
CAUTION
!
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Function

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bd-hdd comboBd-d8500

Inhaltsverzeichnis