How To Activate The Rinse Aid Dispenser; Acoustic Signals - Electrolux GA55SLVCN Benutzerinformation

tablets and rinse aid together. In this case
you have to activate the rinse aid
dispenser.
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press .
• The indicators
off.
• The indicator
• The display shows the current
setting:
deactivated.
3. Press
to change the setting.
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs and
when you set the level of the water
softener. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and until
, , and start
, and go
continues to flash.
= rinse aid dispenser
and until
the indicators
to flash and the display is blank.
2. Press .
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
3. Press to change the setting.
= Acoustic signal on.
4. Press the on/off button to confirm the
setting.
6.5 How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press
.
• The indicators
off.
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers to
a different colour.
– = TimeBeam deactivated.
3. Press again and again to change
the colour.
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm the
setting.
6.6 MyFavourite
With this option you can set and save the
programme that you use more frequently.
ENGLISH
, , and start
, and go
continues to
= Acoustic signal off.
and until
, , and start
, and go
continues to
11