Advice On Disposal - Bosch TDS25 Serie Gebrauchsanleitung

Problem
Water flows through • The steam function is being used before
the holes on the sole it has reached temperature.
plate. • The water is condensing inside the pipes
because steam is being used for the first
time or has not been used for a long time.
Dirt comes out • There is a build-up of scale or minerals
through the sole in the steam tank.
plate.
• Chemical products or additives have
been used.
The iron does not • The boiler is not switched on or the
produce any steam. water tank is empty.
• The water tank is not fitted onto the
housing correctly.
• The steam regulator is set to the
minimum position.
The ironed garment • The selected temperature is too high and
turns dark and/or has damaged the garment.
sticks to the soleplate.
The soleplate turns • This is a regular consequence of usage.
brown.
The iron does not • "Intelligent steam" function activated.
stop steaming after
pla cing it on the pad.
The appliance makes • Water is being pumped into the steam tank.
a pumping sound. • The sound will not stop.
Loss of pressure Steam release button activated during a
during ironing. long period of time.
Water leakage from Drainage plug located at the bottom of the
the boiler appliance is loose.
If the above does not solve the problem, get in touch with authorized technical service.

Advice on disposal

Our goods come in optimised packaging. This basically
consists in using non-contaminating materials which
should be handed over to the local waste disposal service
as secondary raw materials. Your local town council can
give you information about how to dispose of obsolete
appliances.
This appliance is labelled in accordance
with European
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
You can download this manual from the local homepages of Bosch.
Possible causes
Directive 2002/96/EG
Solution
• Reduce the steam flow when ironing at low
temperatures (Variable steam control (3)).
• Point the iron away from the ironing area
and press the steam release button (14)
until steam is produced.
• Use tap water mixed 50% with distilled or
demineralised water. If the tap water in
your district is very hard, mix tap water with
distilled water 1:2.
• Clean the sole plate with a damp cloth.
• Never add products to the boiler water.
• Set the main power (5) button to the "I"
position and/or fill the water tank.
• Fit the water tank back onto the hou sing
correctly (you will hear a click).
• Increase the steam flow by turning the
steam control (3).
• Select a suitable temperature for the
material being and clean the sole plate
with a damp cloth.
• Clean the soleplate regularly with a damp
cloth.
• Just press the trigger once again and the
iron will stop steaming at once.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
Use the steam release button (14) with inter-
vals. This improves the ironing result as the
textiles will be dried and stay smooth better.
Tighten up boiler drainage plug with a coin
en
15