Storing The Appliance; Transport; Storage; Care And Maintenance - Kärcher NT 611 Eco KF Originalbetriebsanleitung

Turning on the Appliance
 Plug in the mains plug of the appliance.
NT 611 Eco KF
A
B
C
A Switch on button
B Switch off button/test key
C Circuit breaker
D Red indicator lamp
 Press the switch on button (NT 611
MWF: the red indicator lamp is ON).
The protection switch is now ready for
operation.
 Press the switch off button/test button
of the protection switch (NT 611 MWF:
Indicator lamp goes off). The protection
switch shuts off.
 Press the switch on button (NT 611
MWF: the red indicator lamp is ON).
The protection switch is now ready for
operation.
 Switch on the appliance at the main
switch.
 Continuously dispose of large volumes
of liquid: Switch on the disposal pump.
Disposal or cleaning operation
 Continuously dispose of liquids or
clean.
Turn off the appliance
 Shut off the disposal pump if necessary.
 Switch off the appliance at the main
switch.
 Press the switch off button/test button
of the protection switch (NT 611 MWF:
Indicator lamp goes off). The protection
switch shuts off.
 Unplug the mains plug of the appliance.
NT 611
MWF
D
I
ON
A O
TEST
B C
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.

Storing the Appliance

 Wrap the mains connection cable
around the hooks on the slider.
 Wind the suction hose around the slid-
ing bow.
 Place the appliance in a dry room and
secure it from unauthorized use.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Hold the appliance at the handle and at
the suction pipe to transport it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Replacing the coarse dirt filter/flat-
fold filter or the exhaust filter
 Open filter door.
 Replace the coarse dirt filter/flat-fold fil-
ter or the exhaust filter.
 Close the filter door, it must lock into
place.
Cleaning the floater
 Release and remove the suction head.
 Clean the floater with a moist cloth.
 Insert and lock the suction head.
– 4
EN

Transport

Storage

17