AEG SANTO 70298-8 DT Gebrauchsanweisung Seite 29

Unscrew the top handle
bracket from the handle rod
(1). Unscrew the bottom hand-
le bracket from the door (2).
Unscrew the top handle
bracket from the door (3) and
screw onto the bottom right-
hand side of the door (4).
Turn the handle bracket with
the handle rod 180° and screw
them to the door (5) and the
fitted handle bracket (6).
Move the small plug from right
to left.
In any case you do not want to
carry out the above mentioned
operations, contact the nearest
After Sales Service Force.. The
After Sales Service specialist
will carry out the reversibility
of the doors at your cost.
Attention:
After having reversed the ope-
ning direction of the doors
check that all the screws are
properly tightened and that the
magnetic seal adheres to the
cabinet. If the ambient tempe-
rature is cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. in that case, wait
for the natural fitting of the
gasket or accelerate this pro-
cess by heating up the part
involved with a normal hair-
drier.
29