Hama EWS-165 Bedienungsanleitung Seite 7

Note – Weekday
You can choose from German (DE), English (EN), Swedish
(SW), Dutch (DU), Spanish (SP), Italian (IT) or French (FR)
for the weekday display.
Setting the time zone
Note – Time zone
• The DCF signal can be received over long distances,
but always transmits the current Central European
Time in Germany. Make sure you account for the time
difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in
Germany. This means that you should set +3 for the
time zone. The clock then automatically sets the time to
3 hours after the DCF signal received or relative to the
manually set time.
Alarm
• In repeatedly press the ALARM ON/OFF button (18) to
display the different alarms. The respective alarm symbols
(12) / /
time/time interval and/or OFF are displayed.
• Press and hold the ALARM ON/OFF button (18) for
approx. 3 seconds to set the alarm time of the alarm
displayed. The hours display/time interval starts to flash.
• Press the ▲ button (16) or the  button (14) to select
the hour for the alarm time/time interval and confirm your
selection by pressing the ALARM ON/OFF button (18).
The minutes display begins to flash. The early alarm is
already activated after confirming the time interval.
• Repeat the process to set the minutes for the alarm time.
• Press the ALARM ON/OFF button (18) repeatedly to also
set the other alarm mode or return to the time display (10).
• If you do not make an entry for 2 minutes, you
automatically exit the setup mode.
6
and the corresponding alarm
Note – Alarm
• When activated, the weekday alarm only triggers an
alarm on weekdays (Monday to Friday). The alarm
symbol (12) is displayed if this alarm is activated.
• When activated, the once-only alarm only triggers an
alarm once. The alarm symbol (12)
if this alarm is activated. This alarm is automatically
deactivated after the alarm has sounded.
• When activated and when the outside temperature is <
0°C/ 32°F, the early alarm triggers an alarm 15, 30, 45,
60 or 90 minutes before the actual alarm (
). The alarm symbol (12)
alarm is activated.
• To determine whether the alarm should be triggered,
the set alarm time is compared to the currently
displayed time (whether normal or time zone-shifted).
• In the corresponding display, press the ▲ button (16) or
the  button (14) to activate/deactivate the corresponding
alarm.
The alarm symbol (12) will appear/not appear.
Note – Early alarm
The early alarm can only be activated if at least one of
the two alarm functions (
activated.
• If the alarm is triggered, the alarm symbol (12) will begin
to flash and an alarm will sound.
• Press the ALARM ON/OFF button (18) to stop the alarm.
Otherwise, it will stop automatically after 2 minutes.
Otherwise, after two minutes snooze mode is activated
automatically.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE
button (20) to activate the snooze function. The alarm
symbol (12) begins to flash in the display. The alarm
signal is stopped for 8 minutes, after which it will
sound again.
• The snooze function can be activated three consecutive
times.
is displayed
and/or
is displayed if this
/ ) has already been