Sleep Mode - clage Zip HydroTap G4 BC 100/75 Gebrauchsanleitung

LCD Screen operation - Section F
Energy Modes
This mode allows the HydroTap to go into energy saving mode. There
are two options available: 'Sleep Mode' and 'On/Off Mode'.

Sleep Mode

In sleep mode the unit will go to "sleep" after a predetermined
period of inactivity. When the period of inactivity passes, the home
screen status window will show "Sleep Mode".
Option2: "2 Hours
gradually drop to room temperature after 2 hours of NO USE and
the boiler and chiller will remain OFF.
Option 3: "Lux Sensor
ually drop to 68 °C when it's dark. (Refer to Lux sensor calibration)
Option 4: "Lux Sensor
room temperature gradually when it's dark and the boiler will remain
OFF.
Option 5: "Lux or 2 Hr
vated otherwise Option 1 will be automatically enabled. (Refer to Lux
sensor calibration)
Option 6: "Lux or 2 Hr
to room temperature gradually and the boiler will remain OFF.
Option 7: "Disable" - Hot circuit will be switched ON.
It is recommended to recalibrate the Lux Sensor after selecting any
of the Lux sensor options from the sleep mode menu.
Activate the sleep mode
1. Press the [MENU] button for
2. Press the [Setting] button.
3. Press the [Energy Modes]
4. Press the [Sleep Modes]
Option1: "2 Hours
water temperature will gradually
drop to 68 °C after 2 hours of NO
USE while the chiller will remain
ON.
OFF" - Hot and Chilled water temperature will
68 °C" - Hot water temperature will grad-
OFF" - Hot water temperature will drop to
68 °C" - When it is dark Option 3 is acti-
OFF" - Hot water temperature will drop
38
main menu.
button.
button then in the next screen,
use the up and down arrow
to select your favourite sleep
mode.
68 °C" - Hot