Cameo CLPST64RGBAQ8W Bedienungsanleitung Seite 14

COLOUR JUMPING MODE
Press the MODE button repeatedly if necessary to select the Colour Jumping Mode (JXXX). Press ENTER (2. digit blinks) to select the 15 colour
jumping function (JUXX) or the strobe function (JFXX) by using the UP and DOWN buttons.
Press ENTER again (3. and 4. digit blink) to adjust jumping speed (JU00 - JU99) and strobe speed (JF00 - JF99) by using the UP and DOWN buttons.
Press ENTER to confirm.
Note: It is possible to use the colour jumping function and the strobe function simultaneously.deactivated, FLASH: 01 = approx. 1 Hz, FLASH: 99 =
approx. 20 Hz). Confirm with ENTER.
RGBA 15 COLOUR
Jumping speed JU00 - JU99
COLOUR FADING MODE
Press the MODE button repeatedly if necessary to select the Colour Fading Mode (FXXX). Press ENTER (2. digit blinks) to select the 15 colour fading
function (FAXX) or the strobe function (FFXX) by using the UP and DOWN buttons. Press ENTER again (3. and 4. digit blink) to adjust fading speed
(FA00 - FA99) and strobe speed (FF00 - FF99) by using the UP and DOWN buttons. Press ENTER to confirm.
Note: It is possible to use the colour fading function and the strobe function simultaneously.
RGBA 15 COLOUR
Fading speed FA00 - FA99
AUTO MODE
Press the MODE button repeatedly if necessary to select the Auto Mode. The unit changes between Colour Jumping Mode and Colour Fading Mode
automatically. The colour jumping and fading speed can be preadjusted by using the speed settings of the Colour Jumping and Colour Fading Modes.
SLAVE MODE
Press the MODE button repeatedly if necessary to enter the Slave Mode. Link slave units and the master unit (exclusively standalone modes) via DMX
cables. The slave unit will follow in sequence with the master unit.
SOUND CONTROL MODE
Press the MODE button repeatedly if necessary to select the Sound Control Mode (SUXX). The unit will follow the beat of the music thanks to the
built in microphone. Press ENTER again (3. and 4. digit blink) to adjust the sensitivity of the microphone (SU00 - SU99) by using the UP and DOWN
buttons. Press ENTER to confirm.
14
STROBE
Speed FF00 - FF99
STROBE
Speed FF00 - FF99