Eibenstock EBS 1802 Originalbetriebsanleitung Seite 22

Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an
electric specialist.
Due to its design, the machine needs a minimum of care and maintenance.
However, the following points always have to be observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in
a sturdy packing. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool's plastic components are marked according to their material,
which makes it possible to remove environmental friendly and
differentiated because of available collection facilities.
Wind the line cord of the tool on the
holder meant for this purpose. Make
sure that the switch of the floor
guiding device is not pressed or
locked. Plug the grinder in the socket of
the floor guiding device. Lead the hose
of the vacuum cleaner above the floor
guiding device, connect it with the
grinder. The clamp will avoid a slipping
of the hose.
22