Eibenstock EBS 1802 Originalbetriebsanleitung Seite 19

Let the machine run for a short period of time and in a safe position. If the
machine does not run easily, stop working immediately.
Use only original accessory!
Application of Grinding Wheels
Type
Diamond Grinding Wheel
Concrete
Screed
Rapid K
PCD
First of all, the hood segment has to be
opened.
Now you can hold up the driving disc
between gearbox and grinding wheel by
using a jaw wrench 32 (1). Use the face
spanner (2) to unscrew the driving nut.
Then remove the mounted grinding
wheel respectively mount the new one.
The assembly works the other way
round!
Max. Colour Application
Rated Speed
10,000 rpm gold,
sand
10,000 rpm yellow for finishing fresh and green
10,000 rpm blue
10,000 rpm black
19
for finishing and facing
concrete, brick, limesand-
stone, basalt, sandstone
concrete, screed, lime
mortar plaster, mortar,
plaster, soft limestone
for removing epoxy resin and
two-component coatings
universal applicable - for
example: concrete, screed,
adhesive remnants and
coatings - grinding wheel
with monobloc diamonds