Customer Service; Replacing The Lamp; Technical Data - AEG Electrolux A61900HLW0 Benutzerinformation

Problem

Customer Service

If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate
or on the rating plate located on the external right side of the appliance.

Replacing the lamp

1. Disconnect the mains plug from the
mains socket.
2. Replace the used lamp with a new lamp
of the same power and specifically de-
signed for household appliances. (the
maximum power is shown on the lamp
cover)
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the lamp
comes on.
WARNING!
Do not remove the lamp cover at the time of replacement.
Do not operate the freezer if the lamp cover is damaged or missing.

TECHNICAL DATA

Dimensions
Rising Time
Possible cause
Power does not reach the appli-
ance.
The appliance is not switched on. Switch on the appliance.
There is no voltage in the mains
socket (try to connect another
appliance into it).
Height × Width × Depth (mm):
876 × 946 × 665
46 hours
Technical data
Solution
Try connecting another electrical
device to the power outlet.
Call an electrician.
Further technical information are situ-
ated in the rating plate on the exter-
nal right side of the appliance.
29