Customer Service; Technical Data; Installation - AEG Electrolux A51100HSW0 Benutzerinformation

Problem
It is too cold inside the
freezer
The appliance does not
work at all. Neither cool-
ing nor lighting works

Customer Service

If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate or
on the rating plate located on the external right side of the appliance.

TECHNICAL DATA

Dimensions
Rising Time

INSTALLATION

Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the lid, you must ensure
that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
This appliance can be installed in a dry, well ventilated indoor (garage or cellar), but for op-
timum performance install this appliance at a location where the ambient temperature cor-
responds to the climate class indicated on the rating plate of the appliance:
Possible cause
The lid has been opened often
The lid has been opened for a
long time.
The temperature is not set cor-
rectly.
Plug is not connected to the
mains socket properly
Power does not reach the appli-
ance
The appliance is not switched on Switch on the appliance
There is no voltage in the mains
socket (try to connect another
appliance into it)
Height × Width × Depth (mm):
850 × 550 × 593
26 hours
Technical data
Solution
Try to not open the lid often
Do not leave the lid open longer
than necessary
Set a warmer temperature
Connect the mains plug properly
Try connecting another electrical
device to the power outlet
Call an electrician
Further technical information are situ-
ated in the rating plate on the external
right side of the appliance.
27