Technical Data; Activating The Rinse Aid Dispenser - AEG Electrolux FAVORIT ÖKOXXL Benutzerinformation

22

Technical data

Problem
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and matt.

Activating the rinse aid dispenser

1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad Delay and touchpad Start at the same time until the pro-
gramme indicators AUTO, PRO and SILENT flash.
4. Release touchpad Delay and touchpad Start.
5. Press touchpad Option.
• The programme indicators AUTO and SILENT go off.
• The programme indicator PRO continues to flash.
• The display shows the setting of the rinse aid dispenser.
6. Press touchpad Option to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions
Possible cause
Incorrect level of the water
softener adjustment.
The salt container cap is not
closed correctly.
The rinse aid quantity is too
high.
The rinse aid quantity is too
low.
The detergent can be the cause. Use a different brand of deter-
The washing programme was
without a drying phase or
with a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
The rinse aid dispenser is off.
The rinse aid dispenser is on.
Width
Height
Possible solution
Adjust the water softener with
the correct level.
Make sure that the salt con-
tainer cap is closed correctly.
Decrease the rinse aid quantity.
Increase the rinse aid quantity.
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
596 mm
850 mm