Cleaning The Milk System - Siemens CT636LES6 Gebrauchsanleitung

en
Care and daily cleaning

Cleaning the milk system

The milk system is automatically cleaned
with a short jet of steam directly after pre-
paring a milk drink
F
Tip: For particularly thorough clean-
ing, the milk system can be addi-
tionally rinsed with water (see the
section "Rinsing the milk system").
Important: Clean the milk system
manually every week and, if
required, also more often (see the
section "Cleaning the milk system
manually")
B
Risk of burns!
The beverage outlet gets very hot
After use, always let it cool down
before you touch it
Rinsing the milk system
■ Press button E and select
"Rinse milk system" with the rotary
selector
■ Press C to start the
programme
■ Open door and remove suction pipe from
the milk tube
■ Wipe the suction pipe and insert the end
of the suction pipe into the hole on the
coffee grounds container
■ Close the door Be careful not to jam the
milk tube
■ Place an empty glass underneath the
beverage outlet
■ Press button C
The milk system is rinsed with water
■ Then empty the glass
■ Press E to exit the program
52
Cleaning the milk system manually
Take the milk system apart to clean it:
■ Push the beverage outlet down com-
pletely and pull the cover forward to
remove
■ Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward
■ Remove the milk tube. Dismantle the
top and bottom sections of the beverage
outlet
■ Separate the milk tubes, connecting
element and suction pipe
■ Clean the individual parts with a deter-
gent solution and a soft cloth