Rigging The Fixture - EuroLite VLS-600RGY Showlaser Bedienungsanleitung

USER MANUAL

Rigging the Fixture

CAUTION! Please consider the respective national norms during
The installation of the fixture has to be built and constructed in a way that it
can hold 10 times the weight for 1 hour without any harming deformation..
The installation must always be secured with a secondary safety attachment,
e.g. an ap propriate catch net. This secondary safety attachment must be
constructed in a way that no part of the installati on can fall down if the main
attachment fails.
Make sure the area below the installation place is free from unwanted persons
during rigging, de-rigging and servicing.
The operator has to make sure that safet y-relating and machine-technical
installations are approved by an expert before taking into operation for the first
time and after changes before taking into operation another time.
The operator has to make sure that safet y-relating and machine-technical
installations are approved by a skilled person once a year.
The fixture should be installed in the position where persons cannot reach and
where persons may walk by or be seated.
CAUTION! When installing the device, make sure there is no highly
the installation! The installation must only be carried out
by an authorized employee or dealers!
in inflammable material (decoration articles, etc.) in
between a distance of min 0.5 meter.
12