Connections - Omnitronic LH-045 Bedienungsanleitung

CONNECTIONS

•The LH-045 provides small and simple microphones pre amplification for a variety of applications. This
device has both – XLR and jack Inputs and Outputs plus a Gain control with a clip indicator. For use of a
condensor microphone, phantom power is included. The jack-socket can either be used as a mono
unbalanced output or a stereo headphone output.
• In order to obtain highest sound-quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.
•Connect your microphone via the XLR-socket (INPUT BAL).
or via the jack-socket (INPUT UNBAL).
• Connect your mixer to the XLR mounting-plug (OUTPUT BAL).
Balanced XLR-socket:
1: Ground
2 1
2: In Phase (+ )
3
3: Out of Phase (-)
Occupation mono 1/4" jack-plug:
Tip Sleeve
In Phase (+) Ground
Balanced XLR mounting-plug:
1: Ground
2: In Phase (+ )
3: Out of Phase (-)
2 1
3
9/10 10355045_V_1_0.DOC