Introduction; Features; Safety Instructions - Omnitronic LH-045 Bedienungsanleitung

LH-045 Mini mic preamplifier
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen an OMNITRONIC LH-045. If you follow the instructions given in this manual,
we are sure that you will enjoy this device for a long period of time.
Unpack your LH-045.
Before you initial start-up, please make sure that there are no transport damages. Should there be any, do
not take the device into operation and immediately consult your dealer.

Features

Mic preamplifier
For connecting a microphone via XLR-socket or jack socket • Signal output via XLR-plug or jack socket •
Gain-control • Clip LED • Phantom-power can be swithed • Power supply via power unit

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Always plug in the power unit least. Make sure that the power-switch is set to OFF position before you
connect the device to the mains.
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
7/10 10355045_V_1_0.DOC