Pkm GS 175.4 A+ NF Bedienungsanleitung Seite 32

7. Fix the fixing plate with 3 screws on the opposite
side. Fix the foot.
8. If the door seal does not fit the housing on any
side, warm it with hot water and press it carefully
on the housing. Adjust the door properly and
check that the door seal closes correctly before
you tighten the hinge-screws. Reinstall the top
Remove the covers and the screws securing
the handle on the door. Detach the handle
und turn it by 180
side.
Finally readjust the appliance. Check with a bubble level. Check that all screws are
well-tightened. Wait at least 2 hours before you connect the appliance to the
mains again. An authorized aftersales service can carry out the change of the hinge
position at your own expense.
Door handle position
0
. Fix it on the opposite
32