Installation; Overhead Rigging - EuroLite LED KLS LASER BAR PRO FX Light Set Bedienungsanleitung

5

INSTALLATION

Always set up and install the unit so that a minimum distance of 1 m is kept between the laser
light and the audience.
The use of controls, adjustments, or performance of procedures other than what is
specified herein may result in hazardous radiation exposure.

Overhead Rigging

Mounting clamp
Fixation screws
This product is designed for overhead rigging to a wall or ceiling with the mounting brackets. If necessary, it
can also be fastened to a truss using appropriate clamps.
To align the unit, release the fixation screws at the mounting brackets, adjust the desired inclanation angle
and retighten the fixation screws. Make sure not to point the laser beams at highly reflective surfaces such
as mirror balls, windows and shiny objects. As a precaution, remove or cover up highly reflective objects in
order to avoid laser reflections.
Please consider the EN 60598-2-17and the respective national standards during the
installation! The installation must only be carried out by an authorized dealer!
Before taking into operation for the first time, the installation has to be approved by an expert!
www.eurolite.de
DANGER LASER RADIATION!
CAUTION!
Safety eyelet
DANGER TO LIFE!
DANGER TO LIFE!
28
Mounting clamp