Control Settings - Sawotec TH2-30NB-CNR Bedienungsanleitung

Control Settings

THERMOSTAT
Adjust the temperature of the sauna by simply turning the operating knob.
Thermostat support automatically the choosen temperature.
In case the heater overheats, the safety sensor will automatically stop the heater
even if the timer is on. Find out for what reason the heater overheated. The reason
for this could be too tightly or too loosely placed sauna stones, heater´s location or
inappropriate ventilation. Exposure of the sensor to the glowing heating element may
cause sensor to overheat. Find out the reason for overheating and fix the problem
before resetting the safety sensor. Reset button (See Fig. 5.).
TIMER
To start the heater at once, turn the knob to anywhere between 1-4 on the operating
time scale. The heater will start and remain on for the time selected.
3 PHASEN
ZEITSCHALTER
TIMER
M
a1 a
b b0
J1
a1 a
b b0
a1 a
b b0
400V 3N~
50/60Hz
N L1 L2 L3
TH5-90NB-CNR 9,0 kW
3 PHASE
TERMOSTAT
THERMOSTAT
PL
A1 B1
A2 B2
A3 B3
SENSOR
PL
( 230V)
N K
Steuerung der elektrischen
Hausheizung (wahlfreie
Verwendung)
Control of Electric Heating
in the household (usage is
optional)
13