General Safety Information - BMW Wallbox Pure Type T2 Installationsanleitung

General safety information

Installation instructions to be retained for future use. Visit our website at www.bmw.com to download
the charging station Owner's Manual.
Please Note
– This charging station should be installed, serviced and maintained only by qualified personnel.
– A qualified person is one who has skills and knowledge related to the design and the operation of
electrical installations, and has received safety training to recognize and avoid the hazards involved.
– All pertinent regional, national and local safety regulations must be observed when installing and
using the charging station.
– BMW cannot be held responsible for failure to follow the instructions given in these installation
instructions.
– Follow installation instruction to avoid EMC problem.
Information for use
– The charging station is designed for a domestic use only.
– This charging station is designed for charging an electric vehicle indoors, or outdoors with a
shelter.
DANGER
HAZARD OF ELECTRIC SHOCK, SHORT CIRCUIT OR OVERHEATING
– To prevent overheating, only use a supply cable with a cross-section suitable for the rated current
used by the charging station.
– Do not install the charging station if any damage is observed while unpacking or handling.
– Before charging vehicles from other manufacturers, trained and qualified personnel must always
check the electrical installation to insure that it meets the specifications/requirements of the
vehicle being charged.
– If the charging cable is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid any hazard.
Failure to follow these instructions will result in death or serious injury.
3