Completing The Charging Process - BMW Wallbox Pure Type T2 Installationsanleitung

Completing the charging process

Step Procedure
1a Vehicle is connected and charging:
The LED indicator flashes blue.
1b The LED indicator must be illuminated in solid
blue. If not, please refer to the Troubleshooting
section.
2a Ending the charging process:
Press the Stop/Start button. The LED indicator
is illuminated in solid green. If not, please refer to
the Troubleshooting section.
Pressing the Stop/Start button again restarts the
charging process. The LED indicator flashes blue
as soon as charging actually begins.
2b Charging halted by vehicle:
The LED indicator is illuminated in solid blue.
3 Disconnect the charging cable from the vehicle:
The LED indicator is illuminated in solid blue. If
not, please refer to the Troubleshooting section.
Note
The indicator on the vehicle's charge
point flashes blue.
Vehicle is connected and charging is
complete:
The LED indicator is illuminated in
solid blue.
The vehicle ends the charging
process:
The indicator on the vehicle's charge
point is illuminated in white.
Possible reason:
– The vehicle interrupts the charging
process because a timer was
programmed:
The indicator on the vehicle's
charge point is illuminated in white.
– The vehicle interrupts the charging
process because the battery is
fully charged:
The indicator on the vehicle's
charge point flashes green.
To release the plug lock:
Open the vehicle using the remote
control.
25