Santec VTC-249IRP/W Bedienungsanleitung Seite 28

OSD menu operation
The camera adjustments are done by an OSD (on-screen-display) menu. On the camera
board you will find a mini-joystick (picture 2). Press onto this joystick and a menu pops up in
the video picture. You can now move the joystick left/right/up/down in order to get to the
desired menu item. For confirming your choice, press onto the joystick.
When pressing the joystick (in OSD called „Press SET"), the following menu pops up:
BRIGHTNESS:
SHUTTER:
Adjustment of picture shutter.

FLK:

Manual :

Fixed :
_________________________________________________________________________________
This camera is pre-equipped with a DC lens. The
setting has to stay at "DC".
Press onto the joystick and a menu to adjust the
picture brightness pops up.
Set the desired value and confirm your choice by
pressing again onto the joystick (return).
FLK (Flickerless) can be set if picture vibration occurs caused by e.g. a
non 50 Hz light source.
Press onto the joystick and a menu for setting values pops up. Press
again onto the joystick (return) to confirm your selection.
Press onto the joystick and a menu for setting values pops up. Adjust
the shutter values here. Press again onto the joystick (return) to
confirm your selection.
Bedienungsanleitung / User manual VTC-249IRP/W
- 28 -