Herunterladen Inhalt Inhalt Diese Seite drucken

Remaining Hazards; Unpacking And Checking Contents - Scheppach 4906806000 Anleitung

Vorschau ausblenden Andere Handbücher für 4906806000:
Inhaltsverzeichnis

Werbung

surface could reflect the beam towards the operator.
• Do not replace the laser light unit with one of a differ-
ent type. Repairs must be performed by the manufac-
turer or an approved contractor.
Caution: You may only use the controls or setting tools
and processes described in this manual. Failure to com-
ply with them may result in hazardous radiation.
Buy accessories from your specialist dealer.
m

Remaining hazards

The machine has been built using modern technology in ac-
cordance with recognized safety rules. Some remaining haz-
ards, however, may still exist.
• Long hair and loose clothing can be hazardous when
the work piece is rotating. Wear personal protective
gear such as a hair net and tight fitting work cothes.
• Wood chips and saw dust can be health hazard. Be
sure to wear personal protective gear such as safety
goggles and a dust mask. Use a vacuum exhaust sys-
tem.
• Thrown work pieces can lead to injury if the work piece
is not properly secured or fed, such as working with-
out a limit stop.
• The use of incorrect or damaged mains cables can lead
to injuries caused by electricity.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimised by following the
instructions in „safety precautions", „proper use" and
in the entire operating manual.

UNPACKING AND CHECKING CONTENTS

WARNING: If any parts are missing, do not attempt to as-
sembly the drill press, plug in the power cord, and turn the
switchon until the missing parts are obtained and correctly
installed.
Separate all parts from packaging material and check
each item ‚th the falling tables af „standard contents"
(Same parts are packed inside of the pulley cover).
Do not discard the packaging immediately, in case you
have to send this product back to your dealer.
Content/ Description/ Amount
1
Base plate
2
Pillar
3
Drilling table
4
Machine head with Laser
5
Keyless drill chuck
6
Grips
Fig. 1
dp 16 sl
1
1
1
1
1
3
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dp 16sl4906806001

Inhaltsverzeichnis