Specifications - Makita DTD136 Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Button

SPECIFICATIONS

Capacities
–1
No load speed (min
Impacts per minute (min
Overall length
Rated voltage
Battery cartridge
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
10 Reversing switch lever
11 Changed in four steps
12 Hard
13 Medium
14 Soft
15 T mode
16 Battery capacity
17 Bit
18 Sleeve
Model
Machine screw
Standard bolt
High tensile bolt
Impact mode (Hard)
Impact mode (Medium)
)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
–1
)
Impact mode (Soft)
T mode
Net weight
DTD136
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,600
0 – 2,100
0 – 1,200
0 – 2,600
0 – 3,200
0 – 2,600
0 – 1,100
0 – 2,600
D.C. 14.4 V
BL1415 /
BL1415N
1.2 kg
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
ENE033-1
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
GEA010-1
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
19 Bit-piece
20 Groove
21 Hook
22 Screw
23 Standard bolt
24 Fastening torque
25 Proper fastening torque
26 Fastening time
27 High tensile bolt
DTD147
4 mm – 8 mm
5 mm – 16 mm
5 mm – 14 mm
0 – 2,800
0 – 2,300
0 – 1,400
0 – 2,800
0 – 3,400
0 – 2,800
0 – 1,300
0 – 2,800
129 mm
D.C. 18 V
BL1815 /
BL1430 /
BL1815N /
BL1440 /
BL1820 /
BL1450
BL1820B
1.4 kg 1.2 kg
BL1830 /
BL1840 /
BL1840B /
BL1850 /
BL1850B
1.5 kg
GEB054-3
5