Temperature Regulation; Switching Off; Child Lock Function - Electrolux SG248 Benutzerinformation

50 www.electrolux.com
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined sound
of buttons to a loudly one by pressing to-
gether Mode button and Temperature
colder button for some seconds. Change
is reversible.
3.1 Display
A
A) Timer indicator
B) FROSTMATIC function
C)
Minute Minder function
D)

Child Lock function

E) Alarm indicator
F) Temperature indicator
3.2 Switching on
To switch on the appliance do these
steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the dis-
play is off.
3.
If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if..." paragraph.
4. The temperature indicators show the
set default temperature.
To select a different set temperature refer
to "Temperature regulation".

3.3 Switching off

To switch off the appliance do these
steps:
1. Press the ON/OFF button for 5 sec-
onds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug
from the power socket.
B C D E F

3.4 Temperature regulation

The set temperature of the fridge may be
adjusted by pressing the temperature but-
ton.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.
3.5 Minute Minder function
The Minute Minder function is to be used
to set an acoustic alarm at the preferred
time, useful for example when a recipe re-
quires to cool down a mixture for a certain
length of time.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30 mi-
nutes) for a few seconds.
2. Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3.
Press the OK button to confirm.
The Minute Minder indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
alarm sounds:
1.
press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown:
1. Press the Mode button until the Mi-
nute Minder indicator flashes.
2. Press the OK button to confirm.
3. The Minute Minder indicator goes off.
It is possible to change the time at any
time during the countdown and at the end
by pressing the Temperature colder but-
ton and the Temperature warmer button.
3.6 Child Lock function
To lock the buttons from unintentional op-
eration select the Child Lock function.
To switch on the function: