Easy Use; Preparing The Machine; Programme Selection; Auxiliary Functions - Grundig GTN 48261 GC Bedienungsanleitung

Easy use

6

6.1 Preparing the machine

1. Plug in the machine.
2. Place the laundry in the machine.
3. Press the On/Off/Cancel button for 1
second (long).
4. Machine starts with the declaration
programme (wardrobe dryness for
cottons).

6.2 Programme selection

1. Decide the appropriate programme from
the table below which includes drying
levels.
2. Select the desired programme with the
Programme Selection knob.

6.3 Auxiliary functions

Auxiliary functions
Audio Warning
Machine will give an audio warning when
the programme comes to an end. Use the
Audio Warning Level button to adjust the
volume level.
Spinning speed selection
Spin speed value used on the washing
machine and the programme time for the
drier can be changed by using the
speed selection button. E.g. Spin speed
defined for wardrobe dryness for cottons
programme is 1000 rpm. Display time for
this spin speed is 145 minutes. User may
decrease the programme time to 135 minutes
by selecting 1200 rpm which is a higher spin
speed.
Spin speed is changed by pressing the
spin speed button as "Spin 1200", "Spin
1400", etc., Dryer automatically updates
the programme time after the spin speed is
changed.
Dryness level adjustment selection
Dryness level adjustment button is used
to set the required dryness level. Programme
duration may change depending on the
selection.
60 / 68 EN

6.4 Starting the programme

Press Start/Pause button to start the
program.
The Start
of the program lights up. The ":" in the middle
of the screen will continue flashing. Drying
and progress of programme bar on the
display light alternately.

6.5 Canceling the programme

If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the
Off/Cancel

6.6 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-
up indicator and "Program Over" label
appears on the display when the programme
comes to an end. The loading door can be
opened and the machine becomes ready for
a second cycle.
Press On / Off / Cancel button to switch off
the machine.
6.7 Child Lock
Spin Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child Lock is active.
In order to activate the Child-proof
Lock, press and hold Audio Warning and
Child lock buttons for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
lock.
symbol that indicates the startup
button for 3 seconds.
Dryer / User Manuel
On/