Specifications; General Power Tool Safety Warnings - Makita BDF441 Betriebsanleitung

ENGLISH (Original instructions)
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Action mode change lever
9. Adjusting ring
10. Graduations

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRILL SAFETY
WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Explanation of general view
11. Arrow
12. Steel band
13. Grip base
14. Side grip
15. Protrusion
16. Groove
17. Sleeve
18. Bit holder
19. Bit
20. Screw
Model
Steel
Wood
Wood screw
Machine screw
High (3)
-1
) Medium (2)
Low (1)
Overall length
Net weight
Rated voltage
6 mm x 75 mm
3. Always be sure you have a firm footing. Be sure
ENE034-1
no one is below when using the tool in high
locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
GEA010-1
only when hand-held.
7. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
GEB051-2
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
21. Hook
22. Limit mark
23. Rear cover
24. Screws
25. Arm
26. Spring
27. Recesed part
28. Carbon brush cap
29. Hole
30. Carbon brush cap
BDF441
13 mm
50 mm
6 mm
0 – 1,700
0 – 600
0 – 300
238 mm
2.3 kg
D.C. 14.4 V
BDF451
13 mm
65 mm
10 mm x 89 mm
2.4 kg
D.C. 18 V
5