Operation - Kärcher K 2.300 Originalbetriebsanleitung


All current-conducting parts in the working
area must be protected against jet water.

The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.

The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.

For safety reasons, we recommend that you
operate the appliance only via a earth-leak-
age circuit breaker (max. 30 mA).

Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.
Safety Devices
Caution
Safety devices protect the user and must not be
modified or bypassed.
Power switch
The appliance switch prevents unintentional op-
eration of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
– The stability of the appliance is warranted
when it is placed onto an even surface.
Scope of delivery
The scope of delivery of your appliance is illustrat-
ed on the packaging. Check the contents of the ap-
pliance for completeness when unpacking.
In the event of missing accessories or any trans-
port damage, please contact your dealer.
Special accessories
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Description of the Appliance
These operating instructions describe the maxi-
mum equipment. Depending on the model, there
are differences in the scopes of delivery (see
packaging).
Illustrations on Page 2 - 3
1 High pressure connection
2 Appliance switch "0/OFF"/ „I/ON"
3 Storage hook for high pressure hose and
mains connection cable
4 Storage for spray lance
5 Storage for trigger gun
6 Water connection with integrated sieve
7 Detergent suction hose (with sieve)
8 Coupling element for water connection
9 Mains cable with mains plug
10 Bearing wheel
11 Trigger gun
12 Lock trigger gun
13 Clamp for high pressure hose
14 High pressure hose
Optional accessories
15 Rotary washing brush
16 Washing brush
17 Spray lance with high pressure nozzle
18 Spray lance with Dirtblaster
19 Spray lance with pressure regulation (Vario
Power)
20 Transport handle
21 Carrying handle
22 Transport handle, detachable
23 Accessory net
24 Detergent Tank
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 3
Illustration

Insert the transport wheels and lock them.
– 6
EN

Operation

Before Startup
13