Safety Devices; Description Of The Appliance - Kärcher G 7.10 M Originalbetriebsanleitung

due care and attention to other persons, in
particular children, who are nearby.
Risk of hearing impairment. Always use
proper ear-protection aids while working with
the appliance.
Do not use the appliance when there are oth-
er persons around unless they are also
wearing safety equipment.
Wear protective clothing and safety goggles
to protect against splash back containing
water or dirt.
When operating the machine, do not place it
in such a way that it can cause damage to
persons, for e.g. on scaffoldings, etc.
Long hours of using the appliance can cause
circulation problems in the hands on account
of vibrations.
It is not possible to specify a generally valid op-
eration time, since this depends on several fac-
tors:
– Proneness to blood circulation deficiencies
(cold, numb fingers).
– Low ambient temperature. Wear warm
gloves to protect hands.
– Continuous operation is worse than an oper-
ation interrupted by pauses.
In case of regular, long-term operation of the de-
vice and in case of repeated occurrence of the
symptoms (e.g. cold, numb fingers) please con-
sult a physician.
Caution
Observe a distance of at least 30 cm when
using the jet to clean painted surfaces to
avoid damaging paintwork.
Never leave the appliance unattended when
it is in operation.
All current-conducting parts in the working
area must be protected against jet water.
Always use appropriate gloves while working
on the device.
Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.

Safety Devices

Caution
Safety devices protect the user and must not be
modified or bypassed.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Thermo-valve at the pump
The thermostat valve prevents the pump from
over-heating.
The circulation heats up the water. At 60 °C wa-
ter temperature, the thermostat valve opens and
lets out hot water.
Prerequisites for the appliance's stabili-
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
– The stability of the appliance is warranted
when it is placed onto an even surface.

Description of the Appliance

When unpacking the product, make sure that no
accessories are missing and that none of the
package contents have been damaged. If you
detect any transport damages please contact
your dealer.
Illustrations on Page 2
1 Spray lance with pressure regulation (Vario
Power)
2 Spray lance with Dirtblaster
3 Trigger gun
4 Lock trigger gun
5 High pressure hose
6 Key to detach the high-pressure hose from
the trigger gun
7 Transport handle
8 Storage for trigger gun
Storage for high-pressure hose
9 Storage for spray lance
10 Fastening for tube drum (optional)
11 Detergent suction hose (with filter)
12 Thermostat valve
13 High pressure connection
14 Coupling element for water connection
5
-
EN
ty
Operation
13