Additional Functions; Start Time Preselect; Reducing The Temperature; Spin Speed - Schulthess Spirit eMotion 7040i Bedienungsanleitung

Additional functions

Selecting additional functions: see chapter
«Washing / Selectingadditional functions».

Start time preselect

By pressing the «Pre-set starting time» button one or
more times, the programme start time can be delayed by
up to 23,5 hours.
This makes it possible to take advantage of cheaper
night-time electricity, for example. The start time and
consequently also the end time of a programme can be
tailored to your individual lifestyle.
The start time and the anticipated programme end time
are shown on the display.
The preselected time starts when the start button is
pressed.
When the start time is reached, the selected programme
starts automatically. The current programme duration will
be displayed.
Note
The start time preselect only works if no soaking pro-
gramme has been selected (see also chapter «Extended
basic settings / Soaking programme»).
In the event of a power cut, the current time is saved.
The duration of the power cut is not taken into account.
When using start time preselection, use a dosing ball
for liquid detergent. If poured directly into the detergent
drawer, liquid detergent slowly runs out and thickens.
If this happens several times, it can lead to blockages due
to detergent deposits.

Reducing the temperature

Pressing the «Washing Temperature» button several
times reduces the wash temperature in 10°C stages (15°C
stages above 80 °C).
The new temperature will be displayed. It can also be
changed during the first two minutes of the programme.
The lower temperature is compensated by an extension
of the post-wash time, which achieves the same result
for less energy.

Spin speed

This function is used to select a lower spin speed or a
rinse stop for a more gentle treatment of the laundry, for
example with delicate laundry (see next section). Without
spin speed reduction the laundry will be spun at normal
spin speed (see chapter «Basic settings / spin speed reduc-
tion»). The spin speed depends on the programme chosen.
By pressing the button repeatedly it can be reduced in
200 or 100 rpm increments. The slowest possible spin
speed is 200 rpm.
The spin speed can also be changed while a programme
is operating but not during the spin cycle however.
Increased spin speed
If the button spin speed is pressed again after «00»,
you can select an increased spin speed (1800 rpm).
The spinning intensity of the laundry will be increased.
44
Money-saving tip
If the laundry is to be dried in a tumble dryer, select a
high spin speed since well-drained laundry needs much
less energy and time for machine drying.

Rinsing stop

The «Rinsing stop» function is used to avoid creasing of
sensitive fabrics. The laundry is held in the last rinse water.
Select rinsing stop by reducing the spin speed until you
see «rinsing stop» on the display.
You can end the programme by draining the laundry
without spinning or by spinning (see chapter «Washing /
Ending the programme with rinsing

Quick wash button

The programme can be shortened or aborted by pressing
the Quick wash button.
See chapter «Washing / Cancelling the programme»).
This button can also be used to select special programmes.
See «Particular programmes» in the chapter «Washing ».

myTop5 programmes

Your washing machine automatically registers how often
a wash programme is used and provides the 5 most
frequently used programmes via the button «myTop5».
By simply pressing the button «myTop5», you can quickly
and easily launch your most frequently used favourite
programme, including special settings, such as the selec-
ted spin speed. By pressing this button twice, the second
most frequently used programme will appear, etc.
What is not saved are the settings «Start time preselec-
tion», «Rinsing stop» and «Soaking». If required, it is
possible to delete the previous frequencies and start regi-
stration anew.
For this see chapter «Extended basic settings / Delete
myTop5».
stop»).