Megasat Combo Benutzerhandbuch Seite 44

1. Network search: Use t u button
to choose ON/OFF.
2. TP SCAN: Scan transponders one by
one. Press OK to start scan channel.
3. SAT SCAN: Scan all the transponders
in one satellite (these transponders
have been set).
Note: In the course of signal searching,
you can see the bar meter of the LE-
VEL and QUALITY, at the same time the
LOCK light will come on with the spea-
ker notification. DiSEqC will indicate
which port is connected to the DiSEqC
1.0 switch.
4. Signal Information
Press F1 to display the signal informa-
tion. You can see the bar meter of the
LEVEL and C/N. Use t u button to
change volume, T/R button to mute.
Press F1 again ,Level and C/N value will
display on the screen.
14
Menu Operation Guide
ENGLISH