Megasat Combo Benutzerhandbuch Seite 35

1. RF IN: Antenna input connection port
2. LNB INPUT: Satellite signal input port; connect directly to satellite antenna with
coaxial cable
3. LCD Screen: Shows menus and programs clearly
4. Power Light: Indicates the Power status (lights green: the meter is power on)
5. Battery Light: Light is Red indicates the meter is being charge now.
Light is Green indicates the meter is full charged
6. 5V-T/ 12V-T/ 24V-T Light: Indicates ANT 5V ON/12V ON / 24V ON/OFF
7. LOCK-T/C: This light will be on when Terrestrial signal or cable signal is locked.
8. LOCK-S: This light will be on when Satellite signal is locked.
9. 22k/13v/18v light: Indicates the mode of 22k/13v/18v
10. POWER key: For turn-on/ turn-off. To press and hold for 3 sec. to power on/off
11. Numerical key: Enters numerical settings directly.
12. EXIT key: Exits from the present menu and backs to the previous one the device
13. MENU key: Enters and exits the main menu
14. Arrow key and OK key: Use Arrow key to browse the item, press OK key to select
15. Function key: Consist of 2 keys, F1-F2
F1: Changes the signal bar on DISH SETUP menu
F2: Actives DiSEqC 1.2 function on the DISH SETUP menu
16. T/R: Selects and plays TV/RADIO channel in playing mode.
17. FIND key: Accesses easy satellite find menu that sets and aligns a satellite dish
quickly.
18. AN/DG: Spectrum analyzer
19. 0/22K / AV IN/OUT: A quick key to switch 22K output on the DISH SETUP menu or
AV IN/OUT switch
20. H/V: A quick key to switch 13/18V output on the DISH SETUP menu
21. HDMI: Audio and video output socket for the high definition television set
22. HW OFF: Reset. Turn off the device from hardware.
23. USB port: Connects with USB disk for upgrade. Backup channel list.
24. AV IN/OUT: Audio and video input/output socket
AV IN Audio L+ video
AV OUT Audio L+ Audio R+ video
25. Charge port: Connects with the charger cord.
Front & Rear view
ENGLISH
05