6.4 Sound Control-Mode
The sound-control works via the built-in microphone.
Press the SOUND ACTIVE-button - the LED lites up red.
Push the Flash/Sensitivity-channel-fader to the desired sensitivity.
The Prog Select-channel-fader and the Speed-channel-fader are void in this mode.
6.5 Hold
Via this button, the Pause Function is set.
Press the HOLD-button - the LED lites up red.
You can activate the Pause Function in any mode.
6.6 Blackout-Modus
Press the BLACKOUT-button and all devices will be set to Blackout-mode.
The Blackout LED lites up yellow.
6.7 Channel-fader Parameters in the Internal Programs-Mode
PROG SELECT Fader
0-25
R - red
26-51
G – green
52-77
B – blue
78-103
RG – yellow
104-129
RB – violet
130-155
GB – cyan
156-181
RGB - white
182-207
7 Color Program
208-233
Auto Program
234-255
Sound Control
8. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
SPEED Fader
void
Program Speed
0-255(slow - fast)
void
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
FLASH/SENSITIVITY Fader
Flash Frequency:
11-255 (slow - fast)
(insensitive – very sensitive)
15/16
0 -10 OFF
Sensitivity:
0 -7 OFF
8 - 255
00041883.DOC, Version 1.2