Faults Table - Pelgrim GK635 Anleitung

6 Faults

6.2 Faults table

If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first by checking the points mentioned below in the
table or visit our website 'www.pelgrimservice.nl' for more information.
FAULT
There is a smell of gas
in the vicinity of the
appliance.
A burner does not ignite.
100
CAUSE
The gas connection of the
gas hob is leaking.
Plug not in socket.
Fuse defective/fuse in
meter cabinet switched off.
Sparkplug dirty/damp.
Burner parts not correctly
installed.
Burner parts dirty/damp.
Main gas tap closed.
Fault in the gas network.
Gas bottle or tank is empty.
SOLUTION
Close the main gas tap.
Contact your gas fitter.
Push the plug into the
socket.
Fit a new fuse or switch the
automatic fuse back on.
Clean and dry the
sparkplug.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Open the main gas tap.
Check with your gas
supplier.
Connect a new gas bottle
or have the tank filled.