Software Update - Triax DVB 168S Bedienungsanleitung

DVB 168 S (GB)-21 050908

9.12 Software Update

If required, the latest development of the receiver operating software can be loaded to this unit
by software update. There are two kinds of software update procedures: Software update
through satellite (ASTRA 19 EAST). This method is also known as "OTA" ("On The Air"). Also,
there is a method of Software update through PC, using the RS-232 data interface on the
rear side of this unit.
Software update through Satellite
Go to the Main Menu and select "System Information".
Use this to check the software version or release date of
the current software before upgrading. System information
screen offers date, software version, and firmware.
The software version is updated by downloading the new
software via the satellite. Prerequisite for this is that a more
up-to-date version is available.
Press OK and enter password.
The Software Update menu appears.
All transponder receiving data are preset by default.
All LNB / DiSEqC data are also preset, but can be
changed, if necessary.
Select "AirDownLoad Start" and press OK.
A message is displayed saying
"Software Update in Progress !"
The receiver first checks whether a more up-to-date
software version is available.
If not, "No Satellite! Please try again later on" is displayed.
After successfully downloading a new software version
"Software update completed!!!" is displayed and the
receiver automatically restarts.
Software update through PC
For carrying out this method you need to have the latest
software file as well as a special "loader" software
for your PC.
It will be available by download from TRIAX website :
Please check availability.
www.triax.com
www.triax.com
21