finnlo LOXON 3272 Bedienungsanleitung Seite 25

Shows the resistance in 32 levels in the rpm-dependant exercise. Additional the profile of the programs, will be shown, too.
For less than 15rpm/min the computer will recognice an end or break. It will show alternativly the average data for rpm, speed, watt and the
heartrate. The display shows the average sign. After that TRIP will be shown in the display and the values for distance, time and kcal. The datas
can be seen for 4 minutes. After 4 minutes, the computer will go into snooze mode. You can wake him up by pressing any button.
Handpulse measurement: Plug in the hand pulse cable in the hand pulse plug (Pulse input) at the back of the computer. Please put both hands
on the sensors, which are assembled on the handlebar. If you lift off one hand off the sensor during measuring, it will take some time to reach
the correct watt value. Both hands have to be kept on the hand pulse sensors.
Pulse measurement with the chest strap: The computer is equipped with a chip, which makes wireless pulse transmission possible using a chest
strap (5.0 – 5.5 kHz). For a heartrate controlled exercise, please use in any case the chestbelt!