Christopeit Sport TM2 12412 Betriebsanleitung Seite 18

Step 4:
1. Attach the hand rail covers (44) onto the hand rails (41) connec-
tion point.
Step 5:
Checks and How to start
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, connect the power supply cable
(18) with wall power (220-240V~50-60Hz) and switch on the
main switch (17) below the front frame.
3. Put the safety key (59) onto the computer (52) and the com-
puter will show normal manual mode. Put the safety clip (59)
at your exercising cloth and stand on the side rails (35). Press
Start-Button and after a Count Down the treadmill start mo-
ving. Start walking onto the walk surface (32) when speed is
slowly and follow the speed. Familiarize yourself with the ma-
chine at a low speed settings.
4. Run in the middle of the running surface (32), hold yourself
tight at handrail (41) if you feel insecure and don't step on the
side foot rails (35). Only run with look at the Computer on the
treadmill during the running. In emergency case, step of the
treadmill lateral and hold on to the handle (41).
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
18