Christopeit Sport TM2 12412 Betriebsanleitung Seite 17

Assembly Instructions
Before beginning assembly, be sure to observe our recom-
mendations and safety instructions.
Put the preassembled machine out of carton and place the base
frame on an even floor. Assembly time: 30 - 40 min.
Step 1:
1. Place the right lift post (39R) with connection cable 2 (86) to
the bottom frame (1) on right side and connect the connection
cable 1 (85) with connection cable 2 (86).
2. Put both lift posts (39R+39L) at bottom frame (1) that screw
holes are aligned and bolt it together by using screws (60+80)
and washers (61+81). Ensure that the cable connections made
are not squashed.
Step 2:
1. Place the connection tube (40) between the lift posts (39L+39R)
and fasten with screws (60) and washers (61) tightly.
Step 3:
1. Place the hand rail (41) to the lift post (39R) on right side and
connect the connection cable 2 (86) with connection cable 3
(87).
2. Put the hand rail (41) onto the lift posts (39L+39R) that screw
holes are aligned and bolt it together by using screws (60).
Ensure that the cable connections made are not squashed.
3. Secure the computer (52) at handrail (41) into desired incline
position with handgrip screw (43).
17