testo 206-pH1 Bedienungsanleitung Seite 25

Function
Auto Off (AUTO OFF)
Beeper (bP)
* Modification less than 0.02pH in 20s
The setting procedure can be interrupted by switching off the
instrument. The modifications are then not saved.
The instrument is switched off.
1 Opening the setting mode:
2 Select temperature unit (°C or °F):
Confirm selection:
3 Switch Hold on (On) or off (OFF):
Confirm selection:
- The gradient and offset values stored in the instrument are
displayed as information.
4 Change view:
5 Select calibration method (1P, 2P or 3P):
Confirm selection:
If 1 or 2 point calibration has been set:
Select calibration points (4, 7 or 10, and 4 7 7 or 7 1 1 0):
Confirm selection:
6 Switch Auto Off on (On) or off (OFF):
Confirm selection:
7 Switch beeper on (On) or off (OFF):
Confirm selection and save settings:
- All of the segments light up briefly and the instrument changes
to the measurement mode.
Description
Instrument switches off
automatically after 10 minutes
if no button has been pressed
Warning sound (button pressed, On (switched on) or
stable reading reached with
Auto Hold function switched on)
.
MODE
.
MODE
.
MODE
.
MODE
MODE
.
MODE
www.
Setting options
On (switched on) or
OFF (switched off)
OFF (switched off)
is kept pressed +
MODE
.
CAL
.
CAL
CAL
.
.
CAL
.
CAL
MODE
.com
5. Operation 9
ON/HOLD
.
CAL
.
information
.
.