Herunterladen Inhalt Inhalt Diese Seite drucken

Brightness; Menu Trasparency; Vga Resolution; Date / Time - urmet domus 1093 Schnellanleitung

Dvr 4 video/audio-looping-kanäle h.264 cif/4cif; dvr 8 video-kanäle h.264 cif/2cif; dvr 16 video/audio-looping kanäle
Vorschau ausblenden Andere Handbücher für 1093:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2.1.1.7

Brightness

This option can be used to vary the OSD menu brightness. Use "▲▼" to select.
2.1.1.8

Menu trasparency

This option can be used to vary the OSD menu transparency level.
Use "▲▼" to select. Possible selections: "1:1", "3:1", "1:3"and "No Trans".
3:1 indicates that the OSD prevails (by approximately three times) over the previous display; 1:3 indicates the opposite.
2.1.1.9

VGA resolution

This option is used to set resolution and refreshing frequency of the VGA video output (used to connect the DVR to the VGA
monitor).
Use "▲▼" to select.
Possible selections: "800x600/60Hz", "800x600/75Hz" and "1024x768/60Hz".
2.1.1.10

Date / time

This option is used to set the current date in day/month/year format and to set the current time in hour/minute/second format.
Press "◄►" to select the day, month, year and hours, minutes, seconds.
Use the number keys 0÷9 on the front panel to enter the date.
This option is used to automatically set time changes (to and from summer saving time).
When the "ORA LEGALE" is on, the clock will be automatically set back by one hour when winter time comes into effect, while it
will be automatically set forward by one hour when summer saving time comes into effect.
Press "ENTER" to access the submenu. Symbol " " in the check box indicates that the setting is enabled; symbol "×" indicates
that it is not.
Press "◄►" to go from one submenu option to another and press "▲▼" to set. Select "CONFIRM" and press "ENTER" to make
the changes effective.
After confirming the setting, in live and play modes, letter "E" or "I" will appear by the side of the date/time indicating summer
(when summer saving time is applied) or winter (when it is not) as shown below:
2.1.1.11

Preview

This menu is used to set camera display mode (
(display, switching time, audio presence and channel arrangement).
Position the "Active Frame" on the "Preview" icon and press "ENTER".
DS1093-024
Figure 22: date/time menu
main/auxiliary monitor
) after the device is switched on, i.e. in LIVE mode
36
22-11-2006 WED 11:35:00 (I)

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1093/064s1093/065s1093/066s

Inhaltsverzeichnis