Use Of Dishwasher Salt; Use Of Detergent And Rinse Aid - Pelgrim GVW5840NY Benutzerinformation

26
Electronic adjustment
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function buttons (B) and
(C) at the same time until the indicators
of function buttons (A), (B) and (C) flash.
3. Release function buttons (B) and (C).
4. Press function button (A),
• The indicators of function buttons (B)
and (C) go off.
• The indicator of function button (A)
continues to flash.

Use of dishwasher salt

How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.

Use of detergent and rinse aid

1 2
30
20
7
5. Press function button (A) again and
6. Deactivate the appliance to confirm.
Use of detergent
3 4
A
-
+
How to fill the detergent dispenser:
1. Press the release button
2. Put the detergent in the dispenser
3. If the washing programme has a pre-
6
5
4. If you use the detergent tablets, put the
5. Close the detergent dispenser. Press
• The acoustic signals sound.
• The display shows the setting of the
water softener (example:
hear five acoustic signals = level 5).
again to change the setting.
If the water softener is set electronically
to the level 1, the salt indicator stays
off.
To help the environment, do not use
more than the correct quantity of deter-
gent.
Obey the instructions on the detergent
packaging.
7
lid of the detergent dispenser.
wash phase, put a small quantity of de-
tergent on the inner part of the appli-
ance door.
tablet in the detergent dispenser
the lid until it locks into position.
and you
2
to open the
1
.
1
.