12
SAFETY GUIDELINES
12.1 Proper usage
HOLZMANN MASCHINEN cannot be held responsible for any injuries or damages if there was
performed manipulation or adjustments to the machine.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN
doesn't assume any responsibility or guarantees.
Warning labels and/or other labels on the machine must be replaced when they were removed.
In the following machine this guards are in effect:
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
Make sure the work area is lighted sufficiently
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely and keep balance
at all times.
Keep away from the running drill!
Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
Do not climb onto the machine!
Attach the machine to the underground
Respectively trained people only and only one person shall operate the machine.
Do not allow other persons, particularly children, to touch the machine or the ca-
ble. Keep them away from your work area.
Make your workshop childproof.
Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m
Use personal safety equipment: ear protectors and safety goggles when working
with the machine.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Emergency button on the control panel
Shutdown when opening the motor pulley cover
Wear suitable work clothes! Do not wear loose clothing or jewelry
as they might get caught in moving parts and cause severe acci-
dents! Wear a hair net if you have long hair.
N O T I C E
METALLDREHMASCHINE / METAL TURNING LATHE ED 750FD
SAFETY GUIDELINES
Seite 28