Maintenance And Cleaning - Berner BACD BL 10,8 V Originalbetriebsanleitung

OBJ_BUCH-2480-001.book Page 16 Friday, March 27, 2015 8:59 AM

Maintenance and Cleaning

 For safe and proper working, always keep the
machine and ventilation slots clean.
Clean the application tool, the tool holder, the pow-
er tool's ventilations slots, and the battery's ventila-
tion slots each time after using.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an after-sales service cen-
tre for Berner power tools.
In all correspondence and spare parts orders,
please always include the 6-digit order number giv-
en on the nameplate of the machine.
Transport
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
The user can transport the batteries by road with-
out further requirements.
When being transported by third parties (e.g.: air
transport or forwarding agency), special require-
ments on packaging and labelling must be ob-
served. For preparation of the item being shipped,
consulting an expert for hazardous material is re-
quired.
Dispatch batteries only when the housing is un-
damaged. Tape or mask off open contacts and
pack up the battery in such a manner that it cannot
move around in the packaging.
Please also observe possibly more detailed nation-
al regulations.
Disposal
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into household
waste!
16 | English
Only for EC countries:
According to the European Guide-
line 2012/19/EU, power tools that
are no longer usable, and according
to the European Guideline
2006/66/EC, defective or used bat-
tery packs/batteries, must be col-
lected separately and disposed of in
an environmentally correct manner.
Subject to change without notice.
1 609 92A 16P • 27.3.15