Proper Use; Features And Equipment; Included Items; Technical Information - Parkside PBS 600 B1 Bedienungs- Und Sicherheitshinweise

Introduction
Belt sander PBS 600 B1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as descri-
bed and for the specified applications. If you pass
the product on to anyone else, please ensure that
you also pass on all the documentation with it.

Proper use

Q
The belt sander - depending on the sanding paper
used - is designed for dry sanding wood, plastic,
metal and putty, as well as painted surfaces. The de-
vice may only be used for dry sanding. Always use
a sanding belt and grade of grit suitable for the par-
ticular surface you are sanding. The speed selected
should also be appropriate for the material. The de-
vice is not intended for commercial use. Any other
use or modification to the device shall be considered
as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for
loss or damage arising from improper use.

Features and equipment

Q
Belt speed adjuster wheel
1
Recesses for clamp mounting
2
Lock button for ON / OFF switch
3
ON / OFF switch
4
Dust box
5
Belt adjuster screw
6
Sanding belt
7
Adapter port
8
Tensioning lever for sanding belt
9
Clamps
10
Adapter for external vacuum extraction
11
Reducer piece
12
16 GB

Included items

Q
1 Belt sander PBS 600 B1
1 Sanding belt
1 Dust collection box
1 Vacuum extraction adapter and reducer piece
(for external vacuum extraction)
2 Clamps
1 Operating instructions

Technical information

Q
Belt sander PBS 600 B1
Nominal voltage:
Nom. power input:
No-load belt speed:
Idle speed:
Sanding belt:
Protection class:
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 87.29 dB(A)
Sound power level:
Uncertainty K:
Wear ear protection!
Total vibration, EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m / s
Rear handle:
Front handle:
The vibration emission value spe-
cified in these instructions was measured in accor-
dance with an EN 60745 standardised measurement
process and can be used to compare tools. The vi-
bration emission value specified can also serve as
a preliminary assessment of the exposure.
Different uses of the power tool give rise to different
vibration emission values and in many cases they
may exceed the values given in these instructions.
230 V ~ 50 Hz
600 W
170–250 m / min
n 360–560 min
-1
0
75 x 457 mm
II /
98.29 dB(A)
3 dB
= 1.901 m / s
2
h,W
2
a = 1.901 m / s
2
h,W
a = 1.566 m / s ,
2
h,W
K = 1.5 m / s
2