Your New Cooker; General Information; Cooking Area; The Oven - Siemens HC724220 Gebrauchsanleitung

Your new cooker

Here you will learn about your new cooker. We will explain the
control panel, the hob and the individual operating controls.

General information

The design depends on the respective appliance model.
Explanations
1 Hob
2 Hotplate knob
3 Function and temperature selector
4 Appliance cooling
5 Oven door
6 Plinth drawer
Control knobs
The control knobs can be pushed in and remain pressed down
when they are in the "out" position. Press down on the control
knob again to release it back up.
76
You will find information on the cooking compartment and the
accessories.

Cooking area

Here is an overview of the control panel. The design depends
on the respective appliance model.
Explanations
1 Hotplate 17 cm or extended cooking zone 17x26
cm
2 Hotplate 14,5 cm
3 Hotplate 18 cm
4 Dual-circuit hotplate 21 and 12 cm
5 Residual heat indicator
Hotplate controls
You can use the four hotplate controls to control the heat
output provided by each hotplate.
Setting
Off position
ý
1-9 Heat settings
Activation
î
Activation
ð
When you switch on a hotplate, the indicator lamp lights up.
Residual heat indicator
The hob has a residual heat indicator for each hotplate. It
shows which hotplates are still hot. Even if the hob is switched
off, the display remains lit until the hotplate has cooled down
sufficiently.
You can save energy by using the residual heat to keep a small
dish warm, for example.

The oven

Use the function selector and the temperature selector to set
the oven.
Meaning
The hotplate is switched off.
1 = lowest output
9 = highest output
Switches on the extended cooking
zone
Switches on the large dual-circuit
hotplate