Door Reversibility - AEG S83600CSW1 Benutzerhandbuch

42 www.aeg.com
8.5 Levelling

8.6 Door reversibility

A
B
E
F
C D
A
B
C
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
• Open the doors. Unscrew the middle
hinge (B). Remove the plastic spacer
(A)
• Remove the spacer (F) and move to
the other side of the hinge pivot (E).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C, D) and move to the
other side.
• Fit the pin of the middle hinge (E) into
the left-hand hole of the lower door.
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (A) on the opposite
side.