Reverse The Door Opening - BOMANN GS 195 Bedienungsanleitung

• Ensure that your mains power corresponds with the specifications of the appliance. The specifica-
tions are printed on the rating label.
• Connect the mains cable to a properly installed and earthed wall outlet.
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING: WARNING:
WARNING: WARNING:
When replacing the door stop, the appliance must be disconnected from the power supply. Always
unplug the appliance first.
NOTE: : : : NOTE
NOTE NOTE
• When installing, ask another person to assist.
You need:
screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
•
• Remove the screw covers at the appliance
cover. Unscrew the below screws and re-
move the appliance cover.
• Transfer the blind cap of the appliance cover
at the opposite side.
• Dismount the upper door hinge by loosening
the screws. Open the appliance door a little
and take it carefully of the lower door hinge.
• Remove the blind cap (B) of the appliance
door. Insert the blind cap (A) contained in the
delivery scope.
NOTE NOTE: : : : NOTE NOTE
Keep the blind cap (B) for a further possible door opening reverse.
• Tilt the appliance slightly backwards and
block it in this position. Unscrew the feet.
Dismount the lower door hinge by loosening
the screws.
• Attach the lower door hinge at the respective opposite appliance side, after you have unscrewed
the hinge pin and used by the other hinge side. Turn in the feet accordingly.
• Replace the appliance upright again. Insert the appliance door on the lower hinge pin and fix the
door to the property position.

Reverse the Door Opening

Reverse the Door Opening
Reverse the Door Opening Reverse the Door Opening
20