Startup / Operation - BOMANN GS 195 Bedienungsanleitung

Haushalts- gefrierschrank

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

• Transfer the upper door hinge on the oppo-

site appliance side correspondingly. Put the

hinge pin in the hole of the appliance door

and tight the screws of the hinge.

• Replace the appliance cover, which you

have removed at the beginning. Tight the

screws and clip the screw covers on.

• Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of

the door is ensured.

Prior to first use

CAUTION

CAUTION: : : :

CAUTION

After transport, the appliance should be left standing for approx. four hours before connecting to the

power supply. Nonobservance could lead to malfunction of the cooling system and causes a break-

down of the appliance.

Clean the interior of the appliance including all accessory parts located inside. Consider the instruc-

tions which we provide in the chapter "Cleaning and Maintenance".

Starting the appliance

Connect the appliance to the power supply and operate the temperature control. See also the follow-

ing section "Settings".

Settings

The power levels MIN - MAX regulates the different values of the internal temperature.

Setting MIN

Setting Normal

Setting MAX

Turning the temperature control clockwise will lower the inside temperature. Note that the temperature

will change depending on the ambient temperature, frequency of door opening and the amount of food

in the appliance.

During initial operation, turn the temperature control to the highest setting first, until the appliance has

reached the desired operating temperature. Afterwards it is recommended to turn the control back to a

medium setting; correcting the temperature at a later point would then be easier.